Iron Cove Bridge

Iron Cove Bridge is a heritage listed bridge linking the suburbs of Rozelle to the southeast and Drummoyne to the northwest, across Iron Cove in the inner-west of Sydney in New South Wales, Australia.



Iron Cove Bridge


Official name                Iron Cove Bridge


Carries                          Motor vehicles, pedestrians and bicycles


Crosses                         Iron Cove


Locale                           Sydney, Australia


Design                          Truss bridge


Total length                 1,535 feet (461.26 m)


Width                           44.95 feet (13.70 m)


Opening date               July 1955


 


Original


The original bridge was constructed of wrought iron lattice girders and opened in 1882 after four years of construction. The area was sparsely populated in the 1880s and the opening of the new bridge not only helped accessibility, it provided a new western route to Sydney via Balmain. All that remains of the original bridge are the sandstone abutments situated on both sides of the cove about 20 metres (65 ft) south of the current bridge. The abutment on the Drummoyne side is listed on the NSW Heritage Register.


 


Replacement


A decision to replace the original bridge was made in 1939 just prior to the outbreak of World War II. Design work began in 1942 and construction by Hornibrook McKenzie Clarke Pty Ltd commenced in 1947. The bridge was officially opened by Hon. J.J. Cahill, MLA, Premier and Colonial Treasurer of NSW on the 30 July 1955. The bridge was built to carry four lanes of traffic, but a fifth lane was later added to the southwest side of the bridge. This extra lane runs outside of the main bridge supports, forcing traffic to remain in the lane for the length of the bridge. The default configuration is three westbound and two eastbound lanes, switching to two westbound and three eastbound lanes during the morning peak.


 


Duplication proposal


On 20 November 2006, the NSW Government announced plans to construct a second bridge over Iron Cove as part of a A$100m upgrade to Victoria Road. The new bridge, which is due for completion in 2009, will carry eastbound traffic and consist of three general traffic lanes and a bus lane. The existing bridge will carry four lanes of traffic westbound - three general traffic lanes and a bus lane, while the existing additional southwest lane will be converted to pedestrian and bicycle use. Premier Morris Iemma said that the Iron Cove Bridge duplication will greatly improve Victoria Road bus services.



Architecture


The bridge is comprised of aesthetically distinctive piers and abutments which reflect the Inter-War Art Deco style. Furthermore it was the last steel truss bridge to be constructed in New South Wales in which rivets were used for field connections prior to the introduction of high strength bolts.



Огигинал статьи «Iron Cove Bridge»  -
Главная страница сайта «Мосты»  -